[MLB-WIRELESS] factory project

Alfred Shippen wireless at shippen.net
Thu Jun 12 18:42:01 EST 2003


Thanks Drew, most usefull indeed! I just happen to have a prism wireless
card for th eproject too...
----- Original Message -----
From: "Drew" <drew at wirelessanarchy.com>
To: "Alfred Shippen" <wireless at shippen.net>
Sent: Wednesday, June 11, 2003 8:06 AM
Subject: Re: [MLB-WIRELESS] factory project


> any linux will work, just run host_ap on a prism card with it. If you
> want a small install, I'd recommend pebble linux
>
> http://www.nycwireless.net/pebble/
> http://hostap.epitest.fi/
>
> Alfred Shippen wrote:
>
> >I have a small project I am working on involving a number of factory
> >equipment I need to network. Due to certain restraints, it is far easier
for
> >me to use wireless LAN.
> >
> >I have a PC104 based industrial PC (DIN mounted) that I am going to use.
I
> >can source PC104 cards OK, but I want to set up this PC as an AP, and I
am
> >not sure how I will do this. I have no limitations on software to use,
most
> >likely I will use some derivative of Red Hat to handle the routing, file
> >sharing etc. (there will also be a modem installed for remote access.)
> >
> >Is there a Linux distro out there that will handle this scenario? Any
advice
> >will be appreciated. (Iam also going to post this to LUV).
> >
> >Cheers
> >Alfred
> >
> >
> >To unsubscribe: send mail to majordomo at wireless.org.au
> >with "unsubscribe melbwireless" in the body of the message
> >
> >
> >
> >
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list