[MLB-WIRELESS] Measuring SWR and power...

[Ratbaggy]

Hi,

Most meetings I bring along the HP 8594E Spectrum analyser with directional coupler and also an Anritsu Sitemaster.  We measure antenna return loss, cable losses, transmit powers etc. across a range of frequencies and can go as far as 3 GHz if required.

Ratbaggy.

  ----- Original Message ----- 
  From: Gustaf Bjorksten 
  To: Melbwireless at wireless.org.au 
  Sent: Wednesday, August 16, 2006 9:55 PM
  Subject: [MLB-WIRELESS] Measuring SWR and power...



  Hiya folks,

  Okies, i have a question. Do any of you regularly measure stuff like SWR and power output of your 2.4GHz nodes, and if so what equipment do you use?

  Obviously most SWR meters out there wont cope with anything beyond the 70cm band, but i have seen some from BIRD that go up to 2.7GHz. Anyone have any experience with these?

  Thanx,
  F00  VK3HAX





------------------------------------------------------------------------------


  _______________________________________________
  Melbwireless mailing list
  Melbwireless at wireless.org.au
  http://wireless.org.au/mailman/listinfo/melbwireless



------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20060816/5542b431/attachment.html>