[MLB-WIRELESS] GDW -> GHO

[Richard Van Orsouw]

Ok, must have something to do with sliding windows, and 3 way handshakes,
must try adjusting ttl timers and the like.

> ----------
> From: 	Ben Holko
> Sent: 	Tuesday, 10 June 2003 2:27 PM
> To: 	Richard Van Orsouw; melbwireless at wireless.org.au
> Subject: 	RE: [MLB-WIRELESS] GDW -> GHO
> 
> UDP is transport also
> 
> IP is layer 3
> 
> 
> 
> -----Original Message-----
> From: owner-melbwireless at wireless.org.au
> [mailto:owner-melbwireless at wireless.org.au]On Behalf Of Richard Van
> Orsouw
> Sent: Tuesday, June 10, 2003 1:58 PM
> To: 'melbwireless at wireless.org.au'
> Subject: RE: [MLB-WIRELESS] GDW -> GHO
> 
> 
> 51.9km's to be exact!!,
> thanx Jamie, I will try austwireless, but failing that I will give u a
> call.
> 
> btw, wrt the OSI model, my link seems to be working upto Layer 3, Layer 4
> (
> Transport, tcp ) is having issues, since picophone works fine (udp) to
> prove
> this, can someone on GHO  run a TFTP server which uses udp so I can use it
> to measure the bandwidth.
> 
> Cheers.
> 
> 
> 
> > ----------
> > From: 	Richard Van Orsouw
> > Sent: 	Tuesday, 10 June 2003 1:08 PM
> > To: 	'melbwireless at wireless.org.au'
> > Subject: 	RE: [MLB-WIRELESS] GDW -> GHO
> >
> > Too bad you couldn't send me a veritech on wednesday's order to
> melbourne
> > :)
> >
> >
> > > ----------
> > > From: 	Jamie Moir
> > > Sent: 	Tuesday, 10 June 2003 10:35 AM
> > > Cc: 	'melbwireless at wireless.org.au'
> > > Subject: 	Re: [MLB-WIRELESS] GDW -> GHO
> > >
> > >
> > > On Tue, 10 Jun 2003, Richard Van Orsouw wrote:
> > >
> > > > I am either going to replace the entrasys card with a veritech 200mW
> > or
> > > I
> > > > have a Cisco AP1200 which I might run in client AP mode. Does any
> know
> > > where
> > > > I can get a pigtail for it, I believe it uses a RF-TNC ?
> > >
> > > I have reverse gender TNC pigtails for $27 if you dont get a local
> > source.
> > >
> > > > was also suggested trying mtu/ttl values. This problem I am
> > experiencing
> > > is
> > > > most likely due to the poor rx from gdw to gho, but it also could be
> a
> > > > timing issue due to the long round trip delays ( since my link is
> 64km
> > > plus
> > > > another 20km to the other nodes). Any suggestions on values I could
> > try
> > > > would be appreciated.
> > >
> > > 64km is really an impressive link, I think Perth is largely too flat
> for
> > > that =)
> > >
> > > Jamie
> > >
> > >
> > > To unsubscribe: send mail to majordomo at wireless.org.au
> > > with "unsubscribe melbwireless" in the body of the message
> > >
> > >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
> 
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
> 
> 
> 
> 

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message