[MLB-WIRELESS] replacement for a dlink900+

rick mibz at optushome.com.au
Wed Jul 16 23:54:05 EST 2003


i seam to be having alot of problems with my dlink900+ im after something i
can have full control thru a web interface like the dlink900+ it doesnt have
to be 22mb

there is NOTHING wrong with the wireless side only with the eth side where
im getting alot of loss

any ideas (see below for pings)

Pinging 10.10.144.130 with 32 bytes of data:

Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Request timed out.
Request timed out.
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Request timed out.
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Request timed out.
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
Reply from 10.10.144.130: bytes=32 time<1ms TTL=127

Ping statistics for 10.10.144.130:
    Packets: Sent = 14, Received = 10, Lost = 4 (28% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
Control-C
^C
C:\Documents and Settings\rik>



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list