[MLB-WIRELESS] Tools for Dlink 900AP owners

[darrend at ndpgroup.com.au]

For those who have some of these as I do, here are some links that may be 
of interest.

Firstly, you can get the 1.4j1 firmware from this page. 
http://www.seattlewireless.net/index.cgi/Wap11Hack
Also the atmel snmp config utility which will allow you to adjust the 
output power. (see instructions on that page)

Also, the linksys wap11 USB config allows for individual tx and rx 
diversity setting which is handy if you intend to mast mount one of these 
babies!
ftp://ftp.linksys.com/pub/network/wap11sw.exe
These are much nicer config tools to use than the dlink versions!

FYI, the RP-SMA is attached to the 'Left' output.

Darren Dreis
Vice President
Melbourne Wireless Inc.
vicepresident at wireless.org.au
http://www.wireless.org.au
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030125/7bf09d15/attachment.html>