[MLB-WIRELESS] D-Link DWL 900+ Firmware

[Robert Tchia]

-----Original Message-----
From: syd-wireless-admin at lists.sydneywireless.com
[mailto:syd-wireless-admin at lists.sydneywireless.com] On Behalf Of Mark
Allen
Sent: Friday, 10 January 2003 8:32 AM
To: mesh at itee.uq.edu.au
Cc: syd-wireless at lists.sydneywireless.com
Subject: [Syd-Wireless] D-Link DWL 900+ Firmware

Morning All..

Dlink has just released the new firmware for the DWL900+

In this fix there is

DWL-900AP+  Release Notes

v.2.5
1. fixed 802.1x MD5 128bits
2. if none connect to AP, wireless card will re-init after 3hrs.(run
none
data relibility)
3. acx version: 3.34
4. fixed power saving mode disable will re-connect.
5. bridge bug
6. ap client forward every packet
7. set to ap client mode, when it reconnect. ap client will re-get ip.
8. psm_on_24f_config.bin is all default value but power saving mode is
on.(the default power saving mode is off)
9. add antenna and antenna transmit power(and their help) on
advanced->performance
10. fixed 256bits, overwrite memory
11. fixed AP-Repeater performance issue
12. stack 1024
13. encode communication with utility(UDP port 27155)
14. support 802.1x

its available from

http://www.dlink.com.au/tech/drivers/files/wireless/dwl900ap+.htm

Regards

Mark Allen

<-><-><-><-><-><-><-><-><-><-><-><-><-><-><-><-><->
Mark Allen -- Alarm Systems Service Technician
Techncian -- ABC Alarms Pty Ltd
Operator -- MPAP, Brisbane Queensland
marka at mpap.net.nosp@m
marka at abcalarms.com.au.nosp@m
redness at iname.com.nosp@m
BCL Reg - B10239QLD
<-><-><-><-><-><-><-><-><-><-><-><-><-><-><-><-><->



_______________________________________________
Syd-Wireless mailing list
Syd-Wireless at lists.sydneywireless.com
For account administration (such as removing yourself from the mailing
list and changing your email address)
http://lists.sydneywireless.com/mailman/listinfo/syd-wireless


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message