[MLB-WIRELESS] help with ricoh cradle

[Fenn Bailey]

You'll need the proper enterasys drivers (just the standard PCMCIA ones off
the site), as the default windows orinoco style ones are sh*thouse.
 
You _may_ also need the attached registry patch (though try it without
first). If the whole machine locks up when you put in the card, then you
need the patch :)
 
Good luck!
 
    Fenn.

-----Original Message-----
From: brendonc at optushome.com.au [mailto:brendonc at optushome.com.au] 
Sent: Tuesday, 29 April 2003 1:53 PM
To: Fenn Bailey
Cc: 'melbwireless'
Subject: RE: [MLB-WIRELESS] help with ricoh cradle


Thanks,
 
I installed SP3 and now it detects it fine. Funny that the other PC was a
plain 2K install with no service packs. Hey ho.. now to get them to talk to
each other. Should they just up and go or do I need further drivers?
 
 

-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au]On Behalf Of Fenn Bailey
Sent: Tuesday, 29 April 2003 1:46 PM
To: brendonc at optushome.com.au
Cc: 'melbwireless'
Subject: RE: [MLB-WIRELESS] help with ricoh cradle


The only thing that springs instantly to mind (Win2K should have drivers) is
the service pack revision installed. Try ticking the 'On windows update'
option in the locate driver dialogue maybe.
 
    Fenn.

-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au] On Behalf Of
brendonc at optushome.com.au
Sent: Tuesday, 29 April 2003 1:15 PM
To: 'Melbwireless'
Subject: [MLB-WIRELESS] help with ricoh cradle


Hi,
Im having trouble with one of my two ricoh cradle/enterasys card
combinations. I put my first set (I have two) in a pc running win2k and it
detected and installed all by itself. (as I expected it to). However, when i
put my second set in another pc running windows 2k it located a PCI device
and ran the new hardware wizard.... it can't find any drivers. Can anyone
tell me why this is happening, has it happened to anyone else? I am now in
the unenviable position of having one PC with a wireless link but nothing to
connect to :-(. Are there a set of the win2k drivers located somewhere?
 
 
 
Thanks in advance
 

    Brendon Codling




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030429/3d410e06/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 1935 bytes
Desc: not available
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030429/3d410e06/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Lucent2k.reg.rename_me
Type: application/octet-stream
Size: 133 bytes
Desc: not available
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030429/3d410e06/attachment.obj>