[MLB-WIRELESS] Weatherproofing a cable

[Matt Pearce]

You have to be a little careful with silicon sealant as it can do bad things
to metals, just make sure you read the directions first.

Matt.

----- Original Message -----
From: "Jason Hecker" <jason at air.net.au>
To: <melbwireless at wireless.org.au>
Sent: Tuesday, February 26, 2002 1:23 PM
Subject: RE: [MLB-WIRELESS] Weatherproofing a cable


> I've not been following this thread but...
>
> Heatshrink would work well too. Gotta love heatshrink.
>
>  >I've found stuff wound around N connects here at work that resembles
some
> sort of > >rubbery(elasticy) sticky tape.
>
> Sounds a bit like latex....
>
>
> --
> To unsubscribe, send mail to minordomo at wireless.org.au with a subject of
'unsubscribe melbwireless'
> Archive at:
http://www.wireless.org.au/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
> IRC at: au.austnet.org #melb-wireless
>
>


--
To unsubscribe, send mail to minordomo at wireless.org.au with a subject of 'unsubscribe melbwireless'  
Archive at: http://www.wireless.org.au/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless