Richard van Orsouw rvo at optusnet.com.au
Sun Aug 30 15:20:57 AEST 2015

G'day Sneeze,


Ask Peter B about ip addresses for GHO



Are you using quagga/zebra for ospf or mikrotik?



This is one for zebra, advertise your networks with 

network 10.10.x.x/28 area





Current configuration:


hostname ospfd

password zebra

log stdout




interface eth0


interface eth1


interface eth2

ip ospf dead-interval 300


interface lo


interface ppp0


router ospf

ospf router-id

passive-interface ppp0

network area


line vty


From: Ryan Abbenhuys [mailto:sneeze1066 at gmail.com] 
Sent: Sunday, 30 August 2015 12:54 PM
To: Richard van Orsouw


Hi Richard,

Long time no speak.  I'm in the process of getting node AAF back on the
network along with a couple of other nodes around me.  

Was wondering if you'd be able to cut and paste me a sample current best
practise OSPF config that's being used, as it's been about 8 years since
I've been connected.

Also you wouldn't happen to know what IP range is being used on the GHO 5g
North interface would you?  Hoping to link our cluster up to that.  


On 29/08/2015 6:27 PM, Richard van Orsouw wrote:

Will the owner of please adjust your dead interval timer to 300s





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.wireless.org.au/pipermail/melbwireless/attachments/20150830/1b3f803b/attachment.html>

More information about the Melbwireless mailing list