[MLB-WIRELESS] Minitar specs

Sebastian Najnert sebby at internode.on.net
Tue Sep 30 15:27:18 EST 2003


Quote from below: "SVEC outputs 15dbm/30mw, Minitar output 18dbm/40mw"

If the Minitar output is 18dBm, wouldn't that be 60mw?


Regards,
Sebastian Najnert
sebby at internode.on.net


-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au] On Behalf Of Nick Grundy
Sent: Tuesday, 30 September 2003 2:08 PM
To: Gordon Staines
Cc: melbwireless at wireless.org.au
Subject: Re: [MLB-WIRELESS] Minitar specs


I was doing some research on the SVEC power output tweek.
the stuff i read said it's a bad thing(tm).

a SVEC outputs 15dbm/30mw of rf energy, which occupies 22Mhz of the
2.4ghz ISM band.
when you modify them to 100mw then the output polutes the entire 2.4Ghz
ISM band and
it also has harmonics down in the MDS spectrum and up in the amatuer
radio 2.4Ghz
spectrum.

The Minitar output 18dbm/40mw from the factory and only occupy 22Mhz of
the ISM band.
I wouldn't want to try and run a couple of hacked SVEC's within the same
RF area, and I
currently have 2 AP's and a ad-hoc link coming into/intersecting my
property. It could
be somewhat of a mess :/

Personally I'm leaning towards using Minitar equipment due to the higher
output levels
and web config, SVEC's are a bitch to configure for those of us who use
macs :)

> G'day Nick,
> 
> I dont know about the DLink from personal experience, but Im also 
> looking at purchasing an AP and the TIB looks like a good place to get

> them from.
> 
> From my initial investigation the SVEC looks like a much better deal 
> especially if you want to tinker with them. The point that you can
tweak 
> the power output (up to 100mw) as well as direct / output to a
specific 
> antenna looks very appealing for our type of application
> 
> Besides its only $25.00 difference in price.
> 
> Does anyone know what the maximum power output for the minitar AP is
and 
> if it can be configured?
> 
> Of course this all depends on your application.
> 
> Cheers
> 
> Gordon
> 
> Nick Sibbing wrote:
> 
> >Subject: RE: recieve sensitivity of wireless ap
> >  Date: Tue, 30 Sep 2003 11:00:46 +0930
> >  From: Minitar Sales <sales at minitar.com>
> >    To: 'Nick Sibbing' <nick.sibbing at arts.monash.edu.au>
> >
> >Rcv sensitivity is 83dbm at 11mbps. Chipset is Realtek and the
> >configuration
> >is via web browser so it will support any OS.
> >
> >Best Regards Sales
> >
> >Gday All
> >I asked minitar for some more info abou their APs which are currently
> >offered on the TIB
> >
> >any clever people care to comment on how this compares with other APs
eg
> >DLink 900
> >
> >Regards Nick
> >
> >To unsubscribe: send mail to majordomo at wireless.org.au
> >with "unsubscribe melbwireless" in the body of the message
> >
> >
> >.
> >
> > 
> >
> 
> 
> 
> 
>
************************************************************************
*********
> The information contained in this e-mail message and any accompanying
files 
> is or may be confidential.  If you are not the intended recipient, any
use, 
> dissemination, reliance, forwarding, printing or copying of this
e-mail or 
> any attached files is unauthorised. This e-mail is subject to
copyright. No 
> part of it should be reproduced, adapted or communicated without the 
> written consent of the copyright owner. If you have received this
e-mail in 
> error, please advise the sender immediately by return e-mail, or
telephone 
> and delete all copies. Fairfax does not guarantee the accuracy or 
> completeness of any information contained in this e-mail or attached
files. 
> Internet communications are not secure, therefore Fairfax does not
accept 
> legal responsibility for the contents of this message or attached
files.
>
************************************************************************
*********
> 
> 
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
> 
> 

~Nick
-----
Every cloud has a silver lining (except for the mushroom shaped ones,
which have a lining of Iridium & Strontium 90)

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message




To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list