[MLB-WIRELESS] mounting a AP

[Jason X]

Hey dude,

All I did was drilled three holes for

1 x pigtail
1 x rj45
1 x power

Got grommets and drilled the holes for the gromets.

Also got two U-Bolts and drilled holes for these. I used 4 grommets under
neath the washers to make sure water wouldnt get it when you screwed it up.

Inserted AP wired it all up. Then silconed the outside of the grommets to
make sure water wouldn't get it. Then I taped up all the seales and over the
grommets.

You might want to drill the holes at the bottom. Cause water can't defity
gravity and go up (so mikey says).

My box had a seal on it so was water proof anyways.

Cheers
Jason


----- Original Message -----
From: "rik" <mibz at optushome.com.au>
To: "'melbwireless'" <melbwireless at wireless.org.au>
Sent: Thursday, April 24, 2003 12:34 AM
Subject: [MLB-WIRELESS] mounting a AP


> so i have the box for the ap i have the ap i have the pigtail i have the
> power and eth cable now how do i mount it on the mast?
>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message