[MLB-WIRELESS] [NODEEAI] Channel Mgmnt

[Brendan Hiley]

I've been using channel 7.
I think SSID should stay wireless.org.au
People should use their Station name option if they want to be identified.

-ProFX

----- Original Message -----
From: "Greg" <turbo at alphalink.com.au>
To: <melbwireless at wireless.org.au>
Sent: Wednesday, May 15, 2002 11:53 AM
Subject: [MLB-WIRELESS] [NODEEAI] Channel Mgmnt


> Considering that everyone that I netstumbled at the last meeting were
using
> CH#11 and everyone has the ssid: wireless.org.au....
>
> I would like to suggest that we all use SSID: wireless.org.au NODE??? for
> better identification,
> and move to a channel where the legal (EIRP) Power output is at the
maximum
> considering a lot of nodes will use high gain directional antenna's.
>
> Should this agreed channel be between CH# 1 to CH# 9 regarding the
> following?
>
> Tony VK3JED writes on http://www.wireless.org.au/wiki/?TonyLangdon
> Have given the matter of spectrum management some thought. The only answer
> here is to put the WLAN on the highest Australian channel (around 2450 MHz
> centre freq), so ATV and satellite operation can use the lower end of the
> band. Unfortunately, the cards default to channel 10, which has a maximum
> EIRP limit of 200 mW, instead of the 4W limit of channels 1-9.
>
> I personally have been using CH#10 on my operating NODEEAI AP, but I can
> change it to any channel that is agreed on, though my Verticle Omni is
> putting out low power at the moment because of  high losses in the
>
dline;-( 
> 
> This should change in the near future though, eh Glen?
> 
> Regards Greg
> www.TurboClub.com/Wireless
> NODEEAI
> Ruckers Hill, Northcote 3070
> 
> 
> 
> 
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
> 
> 



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message