[MLB-WIRELESS] Excellent cable

Jason Hecker jason at air.net.au
Thu Mar 7 13:58:32 EST 2002


For those wishing to save on pigtails in terms of cost and losses incurred 
in all the connectors a pigtail entails, check out the Quickform 86 cable 
from Farnell (part 157-260) which is about $20 per metre.  It has a loss of 
1.23dB/100m at 10GHz.  It's a semi rigid cable so it's very pliable.

I have removed the reverse SMA connector from my DWL-520 PCI wireless card 
and will directly connect the cable to the pads on the board and then run 
it to a $5 panel N connector (from DSE) mounted on the back of the 
PC.  This way one gets a pigtail with not much loss at less than 1/2 the 
price of most pigtails being sold out there.

Hopefully I'll have it done to show and test at tomorrow's meeting.


--
To unsubscribe, send mail to minordomo at wireless.org.au with a subject of 'unsubscribe melbwireless'  
Archive at: http://www.wireless.org.au/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless



More information about the Melbwireless mailing list