[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

evilbunny evilbunny at sydneywireless.com
Wed Jun 26 21:54:23 EST 2002


Hello Andrew,

500mW = 27dBm

27+15+8 = 50dBm or... 100W :)
or if you have a cisco it's 130W ;)

I some how doubt you could make that legal without wasting a lot of RX
and making the whole thing pointless :)

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.SydneyWireless.com - Exercise your communications
freedom to make it do what you never thought possible... 

Wednesday, June 26, 2002, 9:52:44 PM, you wrote:

AD> 3 degree beam width.. i think that 8dBi omni i ordered of TIB from superpass
AD> is 18deg beam width?

AD> you can see where i was coming from saying an amp (2 way?) + this would be
AD> better ?

AD> i thought you could get 500mw amps for 200-300 dollars, not sure tho....



AD> ----- Original Message -----
AD> From: "evilbunny" <evilbunny at sydneywireless.com>
AD> To: "Andrew Dean" <ferni at shafted.com.au>
AD> Cc: "melbwireless" <melbwireless at wireless.org.au>
AD> Sent: Wednesday, June 26, 2002 9:44 PM
AD> Subject: Re[4]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?


>> Hello Andrew,
>>
>> Quick search on google 15.4 dBi omni's has a 3 degree beam width...
>> 175cm long and about 1kg in weight, rated at 216Km/hr
>>
>> http://www.firstmilewireless.com/prod_ant2ov15.html
>>
>> For the vertical plane plot etc...
>>
>> --
>> Best regards,
>>  evilbunny                            mailto:evilbunny at sydneywireless.com
>>
>> http://www.SydneyWireless.com - Exercise your communications
>> freedom to make it do what you never thought possible...
>>
>> Wednesday, June 26, 2002, 9:29:54 PM, you wrote:
>>
>> AD> sorry eveilbunny, i dunno the details
>>
>> AD> all i know is the antennas dont actually create more power, they just
AD> focus
>> AD> the power of the card in a certain direction...
>>
>> AD> ....
>> AD> ----- Original Message -----
>> AD> From: "evilbunny" <evilbunny at sydneywireless.com>
>> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> AD> Sent: Wednesday, June 26, 2002 9:10 PM
>> AD> Subject: Re[2]: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested
AD> ?
>>
>>
>> >> Hello Andrew,
>> >>
>> >> Which is what my previous question was, how small is the beam width?
>> >>
>> >> --
>> >> Best regards,
>> >>  evilbunny
AD> mailto:evilbunny at sydneywireless.com
>> >>
>> >> http://www.SydneyWireless.com - Exercise your communications
>> >> freedom to make it do what you never thought possible...
>> >>
>> >> Wednesday, June 26, 2002, 8:39:39 PM, you wrote:
>> >>
>> >> AD> I'm not 100% on it but as far as I know the higher the gain of an
AD> omni
>> AD> the
>> >> AD> flatter the signal, like a pancake flat :)
>> >>
>> >> AD> which is good if you are on the same level as the omni.. but if
AD> your
>> AD> below
>> >> AD> it or above it... etc.. you won't get a signal.... with a lower
AD> gain
>> AD> omni
>> >> AD> then the signal kinda doesn't go as far... but is more spread out
>> >> AD> vertically....
>> >>
>> >> AD> someone feel free to correct me if I have it wrong?
>> >>
>> >> AD> Ferni
>> >> AD> ----- Original Message -----
>> >> AD> From: "vak" <vak at alphalink.com.au>
>> >> AD> To: "melbwireless" <melbwireless at wireless.org.au>
>> >> AD> Sent: Wednesday, June 26, 2002 8:33 PM
>> >> AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested
AD> ?
>> >>
>> >>
>> >> >> Do you mean that the signal density is three dimensionally flat ?
>> >> >>
>> >> >> Vaskos
>> >> >> ---------
>> >> >>
>> >> >> Drew wrote:
>> >> >>
>> >> >> > vak wrote:
>> >> >> >
>> >> >> > >Nup, not flat range at all.
>> >> >> > >
>> >> >> > 15.4dbi is about as flat as an omni gets.
>> >> >> >
>> >> >> > D
>> >> >> >
>> >> >> > To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> > with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> >> with "unsubscribe melbwireless" in the body of the message
>> >> >>
>> >> >>
>> >>
>> >>
>> >> AD> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> AD> with "unsubscribe melbwireless" in the body of the message
>> >>
>> >>
>> >> To unsubscribe: send mail to majordomo at wireless.org.au
>> >> with "unsubscribe melbwireless" in the body of the message
>> >>
>> >>
>>
>>
>> To unsubscribe: send mail to majordomo at wireless.org.au
>> with "unsubscribe melbwireless" in the body of the message
>>
>>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list