[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

vak vak at alphalink.com.au
Wed Jun 26 21:35:01 EST 2002


So THAT's what beam width is ?

Thank you!!!!!

I haven't been able to understand what it was!

Cheers,

Vaskos
----------

> Hello Andrew,
>
> Which is what my previous question was, how small is the beam width?
>
> --
> Best regards,
>  evilbunny                            mailto:evilbunny at sydneywireless.com
>
> http://www.SydneyWireless.com - Exercise your communications
> freedom to make it do what you never thought possible...
>
> Wednesday, June 26, 2002, 8:39:39 PM, you wrote:
>
> AD> I'm not 100% on it but as far as I know the higher the gain of an omni the
> AD> flatter the signal, like a pancake flat :)
>
> AD> which is good if you are on the same level as the omni.. but if your below
> AD> it or above it... etc.. you won't get a signal.... with a lower gain omni
> AD> then the signal kinda doesn't go as far... but is more spread out
> AD> vertically....
>
> AD> someone feel free to correct me if I have it wrong?
>
> AD> Ferni
> AD> ----- Original Message -----
> AD> From: "vak" <vak at alphalink.com.au>
> AD> To: "melbwireless" <melbwireless at wireless.org.au>
> AD> Sent: Wednesday, June 26, 2002 8:33 PM
> AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?
>
> >> Do you mean that the signal density is three dimensionally flat ?
> >>
> >> Vaskos
> >> ---------
> >>
> >> Drew wrote:
> >>
> >> > vak wrote:
> >> >
> >> > >Nup, not flat range at all.
> >> > >
> >> > 15.4dbi is about as flat as an omni gets.
> >> >
> >> > D
> >> >
> >> > To unsubscribe: send mail to majordomo at wireless.org.au
> >> > with "unsubscribe melbwireless" in the body of the message
> >>
> >>
> >> To unsubscribe: send mail to majordomo at wireless.org.au
> >> with "unsubscribe melbwireless" in the body of the message
> >>
> >>
>
> AD> To unsubscribe: send mail to majordomo at wireless.org.au
> AD> with "unsubscribe melbwireless" in the body of the message
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list