[MLB-WIRELESS] Killer wireless cards...

paul van den bergen pvandenbergen at swin.edu.au
Thu Dec 5 17:04:51 EST 2002


the stuff about NT 4.0 is that to get hotswapping working you need to have 
some (non-free) proprietry software.  this does not seem to apply in this 
case.

I concur that if you are not using a compaq bios, upgrading to a compaq bios 
would not seem to apply either...

It is possible that there are issues with this combination as yet undisclosed.  
What service pack do you have installed and can you upgrade as rick suggests. 
perhaps this might solve the issue.

have you tried google?

On Thu, 5 Dec 2002 04:11 pm, rick wrote:
> the back of the book says some stuff about winnt i know i needed
> servicepack3 for my wifi card to work
> ----- Original Message -----
> From: <lkhoo at csc.com.au>
> To: "melbwireless" <melbwireless at wireless.org.au>
> Sent: Thursday, December 05, 2002 3:51 PM
> Subject: Re: [MLB-WIRELESS] Killer wireless cards...
>
> > hmm ... i re-read the book and still can't figure out how this would have
> > helped the win2k "stopped" system problem.
> >
> > Its not a compaq machine. HW was installed before sw.
> >
> > Lucas
> > -------------------------------------------------------------------------
> >-
>
> --------------
>
> > This email, including any attachments, is intended only for use by the
> > addressee(s) and may contain confidential and/or personal information and
> > may also be the subject of legal privilege. Any personal information
> > contained in this email is not to be used or disclosed for any purpose
> > other than the purpose for which you have received it. If you are not the
> > intended recipient, you must not disclose or use the information
> > contained in it. In this case, please let me know by return email, delete
> > the
>
> message
>
> > permanently from your system and destroy any copies.
> > -------------------------------------------------------------------------
> >-
>
> --------------
>
> > |---------+---------------------------------->
> > |
> > |         |           paul van den bergen    |
> > |         |           <pvandenbergen at swin.edu|
> > |         |           .au>                   |
> > |         |           Sent by:               |
> > |         |           owner-melbwireless at wire|
> > |         |           less.org.au            |
> > |         |
> > |         |
> > |         |           05/12/2002 09:37 AM    |
> > |
> > |---------+---------------------------------->
> >
> >--------------------------------------------------------------------------
> >-
>
> -------------------------------------------------|
>
> >   |        To:      melbwireless <melbwireless at wireless.org.au>
> >   |
> >   |        cc:
> >   |
> >   |        Subject: Re: [MLB-WIRELESS] Killer wireless cards...
> >
> >--------------------------------------------------------------------------
> >-
>
> -------------------------------------------------|
>
> > there is a fine manual. I have one here.
> > (this is for the PCD-RP-101CE)
> >
> > it is mostly stuff you'd expect. Turn off machine before inserting card
> > into
> > PCI slot, this is what it looks like in windows, etc.
> >
> > there is a pick slip in the front of the fine manual. It says (some
> > paraphrasing);
> >
> > Release Note
> > pccard drive PCD-RP-series
> > troubleshooting
> > compaq Deskpro EN series
> > Problem:
> > system freezes while booting up after installing the PC Card drive in the
> > computer.
> > Solution:
> > go to www.compaq.com
> > download latest ROMPaq ROM Image (v2.11 or later)
> > follow compaqs instructions and update the BIOS.
> > this will solve the problems
> >
> > looking through the manual, there are some minor points people might like
> > to
> > see, such as install the HW before the software under windows (but we all
> > knew windows was flaky like this, didn't we?    right?)
> >
> > If there is sufficient demand I will scan a copy this w/e.  anyone who
> > did not
> > recieve a copy of the manual and who wants an electronic copy let me
> > know. if there are more than say 5 people i will do it....
> >
> > --
> > Dr Paul van den Bergen
> > Centre for Advanced Internet Architectures
> > caia.swin.edu.au
> > pvandenbergen at swin.edu.au
> > would somebody get this big walking carpet out of my way?
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message

-- 
Dr Paul van den Bergen
Centre for Advanced Internet Architectures
caia.swin.edu.au
pvandenbergen at swin.edu.au
would somebody get this big walking carpet out of my way?

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list