[MLB-WIRELESS] Antenna design idea, probably not new.

Dean Collins dean.collins at bigpond.com
Thu Apr 11 13:23:03 EST 2002


Anyway we can get a bulk purchase of these ex galaxy antennas? Anyone know
of a source?

Dean

 -----Original Message-----
From: 	owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au]  On Behalf Of Darren Fulton
Sent:	Thursday, 11 April 2002 12:24 PM
To:	melbwireless at www.wireless.org.au
Subject:	Re: [MLB-WIRELESS] Antenna design idea, probably not new.

Having just built a yagi with brass and aluminium, something like this would
be great. My antenna works, and was reasonably cheap to build but it took
about 6 hours and a lot of very careful measuring with vernier calipers.
My conclusion and the end of the process was that the ex-galaxy dishes have
probably the best price to performance ratio of any wlan antenna.

Darren
----- Original Message -----
From: <Matthew.C.Boyd at uts.edu.au>
To: <melbwireless at www.wireless.org.au>
Sent: Thursday, April 11, 2002 9:10 AM
Subject: [MLB-WIRELESS] Antenna design idea, probably not new.


> Here's a question for the antenna tech people in the group.
> Would it be worthwhile building an antenna based on a printed circuit
> board? I'm thinking a small yagi. I've seen components in other antenna
> made from PCB but what about the whole thing. Instead of instructions on
> how to build all you'd need to do is trace out the antenna, etch the PCB
> and solder on the cable? Would make an excellent portable antenna, or
> lightweight pole mount.
> Or is there something I am missing here?
>
> Matt
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list