[MLB-WIRELESS] Ready to connect in Croydon?
agatha at processplant.com
Fri Nov 9 11:22:24 EST 2001
I've got one mutha freakin thick book on who owns what bandwidth in AU - listing all freq, not just public wlan type stuff. I'd be happy enough to scan the sucker and post it when I get a spare clock cycle or something...
----- Original Message -----
From: simmans at datafast.net.au
To: melbwireless at melbwireless.dyndns.org
Sent: Friday, November 09, 2001 10:46 AM
Subject: RE: [MLB-WIRELESS] Ready to connect in Croydon?
the authority web site is www.aca.gov.au and deals with spread spectrum.
On another question is there anyboby in the city of melbourne setting up a
>> Is there something you know that we dont? What is the
>> difference exactly
>> between them and us? Ive got a list from Cisco what
>> frequencies belong to
>> who, but it doesnt show Australia. Most gear could just be
>> flashed or have
>> an option under setup for zoning surely.
> One of the guys on this list (Hi Dave) will know more than I do, but
> basically the ISM band (2.4 GHz) is defined differently here than in
> the US, but the ACA (in a wise move) have allowed US spec gear to
> operate at a lower EIRP level (0.2 instead of 4W).
> And yes, at least some gear can be reprogrammed to Aussie specs.
> FYI, the Aussie band limits are 2400 - 2463 MHz. The US band is
> 2400-2483 (or thereabluts, don't quote me on the exact figures).
> Because of the nature of spread spectrum, it is not always possible to
> "not use" the "extra bit" - the spreading sequence usually needs a
> As I said, this is sometimes possible in the card's NVRAM.
> To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
> subject of 'unsubscribe melbwireless' Archive of the Entire mailing
> list at:
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a subject of 'unsubscribe melbwireless'
Archive of the Entire mailing list at:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Melbwireless