[kernel-xen] Xen 4.1 and latest CentOS 7.2.1511

Steffan Cline steffan at hldns.com
Tue Dec 29 11:21:14 AEDT 2015


Steve,

Here is how I had installed it.

1) Installed CentOS 7 from an image I had
2) Installed Cloudmin which did this: (from an excerpt of http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-gpl-redhat-install.sh) 
--------------------------------------------------
# Enable Xen kernels repo, if on CentOS 6
yum info kernel-xen >/dev/null 2>&1
if [ "$?" != 0 ]; then
	echo Enabling Xen kernel repo for CentOS 6 ..
	yum install wget
	yum install http://au1.mirror.crc.id.au/repo/kernel-xen-release-6-5.noarch.rpm
	if [ "$?" != 0 ]; then
		echo .. repo install failed
		exit 1
	fi
	echo .. done
	echo ""
fi


# YUM install Perl, modules and other dependencies
echo Installing required Perl modules using YUM ..
yum install -y perl openssl perl-Net-SSLeay vixie-cron bind bind-utils kernel-xen kernel-xen-devel xen xen-libs lsof perl-Data-Dumper
if [ "$?" != 0 ]; then
	echo .. install failed
	exit 1
fi
yum install -y perl-JSON
yum install -y dhcp
yum install -y openssh-clients
echo .. done
echo ""

————————————————————————
3) Did a reboot, all was well using the Xen kernel vmlinuz-4.1.15-2.el7xen.x86_64.

4) Did a yum update, all seemed ok, rebooted and ended up in the new CentOS kernel.

5) Changed it back using grub2-set-default 2 (which was the xen kernel)

6) Reboot - stuck in dracut.

	


Thank you,
Steffan Cline
602-793-0014







On 12/28/15, 5:07 PM, "Steven Haigh" <kernel-xen-bounces at lists.wireless.org.au on behalf of netwiz at crc.id.au> wrote:

>Is this using the kernel-xen package as a Dom0, DomU or on bare metal?
>
>On 29/12/15 07:20, Steffan Cline wrote:
>> If you figure it out, please let us know. I have several hours into it.
>> 
>> I have 4 dead Dell R610 hosts until I figure out what to do about this.
>> 
>> Sadly I must keep going until I figure it out.
>> 
>> Thank you,
>> Steffan Cline
>> 602-793-0014
>> 
>> 
>> From: <kernel-xen-bounces at lists.wireless.org.au
>> <mailto:kernel-xen-bounces at lists.wireless.org.au>> on behalf of
>> Christiaan den Besten <chris at prolocation.net <mailto:chris at prolocation.net>>
>> Reply-To: Xen Dom0 kernel for EL6 <kernel-xen at lists.wireless.org.au
>> <mailto:kernel-xen at lists.wireless.org.au>>
>> Date: Monday, December 28, 2015 at 12:36 PM
>> To: Xen Dom0 kernel for EL6 <kernel-xen at lists.wireless.org.au
>> <mailto:kernel-xen at lists.wireless.org.au>>
>> Subject: Re: [kernel-xen] Xen 4.1 and latest CentOS 7.2.1511
>> 
>> Hi Steffan!
>> 
>> Wont help you right away, but i had the same issue with a freshly
>> installed system last night. 
>> 
>> So this will probably influence others as well if they would update.
>> 
>> Haven't started troubleshooting just yet ...
>> 
>> bye,
>> Chris
>> 
>> On 28 dec. 2015, at 20:18, Steffan Cline <steffan at hldns.com
>> <mailto:steffan at hldns.com>> wrote:
>> 
>>> dracut keeps stopping at “A start job is running for
>>> dev-maps…\x2root.device (XXs / no limit)”
>>>
>>> A couple times I was able to hit the emergency shell still though, not
>>> sure what to do from there.
>>>
>>> I’ve read up on this and everything says it’s an issue with initramfs.
>>> I have redone it a few times now and no change.
>>>
>>> Bit of a problem. Have a dead host.
>>>
>>> Suggestions?
>>>
>>> Thank you,
>>> Steffan Cline
>>> 602-793-0014
>>>
>>>
>>> From: <kernel-xen-bounces at lists.wireless.org.au
>>> <mailto:kernel-xen-bounces at lists.wireless.org.au>> on behalf of
>>> Steffan Cline <steffan at hldns.com <mailto:steffan at hldns.com>>
>>> Reply-To: Xen Dom0 kernel for EL6 <kernel-xen at lists.wireless.org.au
>>> <mailto:kernel-xen at lists.wireless.org.au>>
>>> Date: Monday, December 28, 2015 at 12:01 AM
>>> To: <kernel-xen at lists.wireless.org.au
>>> <mailto:kernel-xen at lists.wireless.org.au>>
>>> Subject: [kernel-xen] Xen 4.1 and latest CentOS 7.2.1511
>>>
>>> I was using the kernel-xen-4.1.15-2.el7xen.x86_64.rpm with CentOS 7
>>> but after the update to 7.2.511 I can’t get past dracut.
>>>
>>> I have regenerated grub.cfg and the initramfs file but it still gets
>>> stuck.
>>>
>>> I’ve reached the limits of my skill set. Anyone have any suggestions?
>
>-- 
>Steven Haigh
>
>Email: netwiz at crc.id.au
>Web: https://www.crc.id.au
>Phone: (03) 9001 6090 - 0412 935 897
>
>_______________________________________________
>kernel-xen mailing list
>kernel-xen at lists.wireless.org.au
>https://lists.wireless.org.au/mailman/listinfo/kernel-xen



More information about the kernel-xen mailing list