<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Recently I hade the need to stumble some AP's from
my roof. I dragged the laptop etc up to the peak and connected my
enterasys card to the pigtail and dish.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I got nothing. Even using my 25dbi dish
pointed to Node GMI the laptop could see nothing? (checking my Dlink 900ap+'s
site survey showed around 7 AP's "seeable" from the same antenna).</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Bringing it down to the "shack" I turned on both my
shack AP's (Minitar and SVEC) but could only stumble the AP that I was
associated with, ie, either the SVEC or the Minitar but never scan and stumble
both at the same time?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I re installed netstumbler 0.3.3 (0.4 cause lockups
on my old laptop) and even went as far as re-installing the enterasys
driver.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The card works as I can surf the net from it but
this stumbling problem has me beat? It did work "last" time I
tried.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mark</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>