<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I'm wanting to try changing the power output of my
svec unit, but am confused by the settings in the SNMP manager.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>For each channel, I have columns for CR17, CR20 and
CR21</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I also have additional CR1, CR2, CR3, CR28 and CR29
fields to the right.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I don't want to boost my unit to the full 100mw, as
I've heard this increases noise problems, but I do want to increase it slightly,
and try a few things with it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Can someone please tell me which field(s) I should
be changing, and to what values?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>FYI - The problem I currentlyl have, is I'm trying
to hit a unit through a lot of trees. I've found that I can indeed see the unit,
but every now and then it just drops out, and I've got to play around again, to
get it connect. (I think I'm right on the edge of the signal, and I'm hoping by
increasing the power slightly at both ends, I'll be able to get a weak, but
reliable link).</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks & Regards</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Adam.</FONT></DIV></BODY></HTML>