<html>
<head>
</head>
<body>
Cameron,<br>
<br>
transfer rates are a little tricky, 'coz there are two ways of measureing
them<br>
<br>
1 PURE Bandwidth - how many BITS per second!<br>
2. Transfer performance (usually measured in BYTES per second)<br>
<br>
The stats you are getting are pretty reasonable, but you should be able to
get about 550(-600)k/sec <br>
<br>
<br>
these cards are 11 Mbit,<br>
<br>
if you work it out, you are getting about 2.5mbit transfer rate (not counting
TCP overheads) Bear in mind that these devices are 11mbit TOTAL bandwidth,
so if you have two PC's communicating, then you can really only expect up
to approx 5Mbit transfer, 3PC's then about 3.5 Mbit & so on.<br>
<br>
Wireless is NOT switched bandwidth like most modern wired networks, but shared
(like running a hub instead of a full switch)<br>
Personally not sure about what effect using an AP is having, but this *could*
be reasonable!<br>
<br>
maybe the rest of the list can help you more....<br>
<br>
well done on getting your WLan up & running!<br>
<br>
Rowan<br>
<br>
Cameron Donaghey wrote:<br>
<blockquote type="cite" cite="mid:5.1.0.14.2.20020916154805.00b22050@pop-server">
Hello Everyone,<br>
I have eventually got my wireless up and running, only on a private level
at the moment, and<br>
yet I am not entirely sure it is running correctly. I have two machines and
in each one I have<br>
a Compaq WL100 card set to infrastructure mode. I also have a linksys Wap11
access point<br>
which is running as an access point only.<br>
I have done some testing and I seem to have a max. transfer rate between
the two machines<br>
of about 310kb/s and the machines are only a meter or so apart. I would have
assumed that<br>
being a 11mb/s network that I would be able to achieve more so around 500-1000kb/s
rather<br>
than the 300kb/s max. I am currently achieving. Both card say they have "excellent
connections"<br>
and at 11mb/s.<br>
My question to you all, is the transfer speed of about 300kb/s typical for
802.11b or should I be<br>
able to achieve higher rates of transfer? If I should be able to achieve
more would anyone have<br>
any suggestions towards resolving the problem?<br>
Thanks very much,<br>
Cameron Donaghey<br>
<br>
</blockquote>
<div class="moz-signature">
<div class="moz-text-plain" wrap="true" graphical-quote="true" style="font-family: Courier New; font-size: 13px; ">
<pre wrap="">**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error
please delete the e-mail & notify the system manager.
We reserve the right to scan all e-mail traffic for restricted content
and to monitor all e-mail traffic in general.
The views and opinions expressed in this e-mail are those of the sender
and do not necessarily reflect the views of the organisation
by whom they are employed, except where the sender expressly
and with authority states them to be so.
This footnote also confirms that this email message
has been checked for the presence of computer viruses and scripts.
We believe but do not warrant that this e-mail is free from viruses.
Responsibility for virus checking rests entirely with the recipient.
5@356
**************************************
********************************</pre>
</div>
<br>
<br>
</div>
<br>
</body>
</html>