[MLB-WIRELESS] DD-WRT OSPF Bird Config

[Andrew Van Slageren]

Hi Richard,

I believe most of the guys who would have been running OSPF on *WRT distros would have been using quagga (myself included), but I'd say the majority of routing on the network runs on Mikrotik routerboards.

I've never used BIRD before, however the OSPF configuration that we run over the MW network is very simple (broadcast, one area with an ID of '0.0.0.0', and no authentication), so feel free to have a crack at configuring it and let us know how you go.

Cheers,
Andrew.
(Node KFI)

From: melbwireless-bounces at lists.wireless.org.au [mailto:melbwireless-bounces at lists.wireless.org.au] On Behalf Of ejb at trick-1.net
Sent: Tuesday, 27 November 2012 10:15 PM
To: melbwireless at lists.wireless.org.au
Subject: [MLB-WIRELESS] DD-WRT OSPF Bird Config

Hi Folks

Does anyone have a bird.conf file to support the melbourenwireless network? If so would you be able to share?

I have a Linksys WRT54GS running DD-WRT v24-sp2 (11/02/09) std and am looking to get OSPF up and running. The BIRD (http://bird.network.cz ) routing daemon is part of the base firmware so it would be ideal if I can get it to work.

Thanks in advance

Regards

Richard
(node JYK)



Important Notice: The contents of this email are intended solely for the named addressee and are confidential; any unauthorised use, reproduction or storage of the contents is expressly prohibited. If you have received this email in error, please delete it and any attachments immediately and advise the sender by return email or telephone.

Deakin University does not warrant that this email and any attachments are error or virus free.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.wireless.org.au/pipermail/melbwireless/attachments/20121128/fb873a52/attachment.html>