[MLB-WIRELESS] Cisco AP1200

[Mark Aitken]

You'll need a TFTP server to update the firmware.....I configured 100's 
of these,  both as lightweight and autonomus,  prefer autonomus from a 
fiedl service point of view.

On 14/11/2012 17:36, Andrew van Slageren wrote:
> Hi Andre,
>
> They'll most likely be running the lightweight firmware, which is used 
> when the AP's are managed centrally by a Cisco WLC. No-go as far as 
> DDWRT/OpenWRT is concerned, but I'll email you the autonomous 
> (non-WLC) firmware image tomorrow if you'd like.
>
> Great little AP's - bit of a pain to configure, but rock solid once 
> they're going.
>
> Cheers,
> Andrew.
>
> On 14/11/2012 5:05 PM, Andre Walker wrote:
>> Hi , Ive been given a hand full of Cisco AP1200. They seem to have a 
>> weird firmware installed as they were part of a school 
>> system. I've tried to do a hard reset but with no luck. Still cant 
>> get passed the user/password. Has anyone got original firmware for 
>> these or has anyone put something like DDWRT onto them? I have 5 and 
>> i only think i need 3 so also if anyone would like a couple just give 
>> a shout! I also have the Cisco POE adapters as well...but i'm not 
>> sure if they are working.
>>
>> Any ideas welcome!
>>
>> Andre
>>
>>
>> _______________________________________________
>> Melbwireless mailing list
>> Melbwireless at lists.wireless.org.au
>> https://lists.wireless.org.au/mailman/listinfo/melbwireless
>
>
>
> _______________________________________________
> Melbwireless mailing list
> Melbwireless at lists.wireless.org.au
> https://lists.wireless.org.au/mailman/listinfo/melbwireless

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.wireless.org.au/pipermail/melbwireless/attachments/20121114/73c50041/attachment.html>