[MLB-WIRELESS] Bricked WAP54GV3 - Tried JTAG
wridg_weinbergs at westnet.com.au
wridg_weinbergs at westnet.com.au
Fri Jan 26 06:41:07 EST 2007
I am thinking that might have to be the next step - a few really
generous offers.
I take it from your capture that your running a flashed unit with the
openwrt platform?
This unit is a vanilla box (used for our corporate access) so it is
running linksys code.
Can I expect output to be similar on the com port when using vanilla
code?
---- Original Message ----
From: wireless at smithsgully.net
To: wridg_weinbergs at westnet.com.au, melbwireless at wireless.org.au
Subject: Re: [MLB-WIRELESS] Bricked WAP54GV3 - Tried JTAG
Date: Fri, 26 Jan 2007 01:55:30 +1100
>Only have experience with V2 hardware but I would suggest building up
>the
>serial interface (MAX232 etc.). If it's working at all, you should
>get
>something out of the serial port which may give you some clues.
>
>For what it's worth, here's what comes out of my V2's serial port
>booting up
>Freifunk...
>
>CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
>Build Date: Tue Jan 20 03:30:40 CST 2004 (vlinux at Test)
>Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
>
>Initializing Arena.
>Initializing Devices.
>et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.0
>CPU type 0x29007: 200MHz
>Total memory: 0x2000000 bytes (32MB)
>
>Total memory used by CFE: 0x8032BA00 - 0x80430F00 (1070336)
>Initialized Data: 0x8032BA00 - 0x8032DB50 (8528)
>BSS Area: 0x8032DB50 - 0x8032EF00 (5040)
>Local Heap: 0x8032EF00 - 0x8042EF00 (1048576)
>Stack Area: 0x8042EF00 - 0x80430F00 (8192)
>Text (code) segment: 0x80300000 - 0x80309420 (37920)
>Boot area (physical): 0x00431000 - 0x00471000
>Relocation Factor: I:00000000 - D:00000000
>
>Device eth0: hwaddr 00-90-4C-60-04-00, ipaddr 192.168.100.250, mask
>255.255.255.0
> gateway not set, nameserver not set
>Reading :: Failed.: Timeout occured
>Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
>Loading: .. 3704 bytes read
>Entry at 0x80001000
>Closing network.
>Starting program at 0x80001000
>CPU revision is: 00029007
>Primary instruction cache 8kB, physically tagged, 2-way, linesize 16
>bytes.
>Primary data cache 4kB, 2-way, linesize 16 bytes.
>Linux version 2.4.30 (root at pcacer) (gcc version 3.4.4 (OpenWrt-1.0))
>#1 So
>Mär 5 15:51:52 CET 2006
>Setting the PFC value as 0x15
>Determined physical RAM map:
> memory: 00800000 @ 00000000 (usable)
>On node 0 totalpages: 2048
>zone(0): 2048 pages.
>zone(1): 0 pages.
>zone(2): 0 pages.
>Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2
>init=/etc/preinit noinitrd console=ttyS0,
>115200
>CPU: BCM4712 rev 1 at 200 MHz
>Using 100.000 MHz high precision timer.
>Calibrating delay loop... 199.47 BogoMIPS
>Memory: 6196k/8192k available (1399k kernel code, 1996k reserved, 96k
>data,
>80k init, 0k highmem)
>Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
>Inode cache hash table entries: 512 (order: 0, 4096 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
>Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
>Checking for 'wait' instruction... unavailable.
>POSIX conformance testing by UNIFIX
>PCI: Fixing up bus 0
>PCI: Fixing up bridge
>PCI: Fixing up bus 1
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Starting kswapd
>devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
>devfs: boot_options: 0x1
>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
>Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
>pty: 256 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
>SERIAL_PCI enabled
>ttyS00 at 0xb8000300 (irq = 3) is a 16550A
>ttyS01 at 0xb8000400 (irq = 0) is a 16550A
>b44.c:v0.93 (Mar, 2004)
>eth0: Broadcom 47xx 10/100BaseT Ethernet 00:90:4c:60:04:00
>Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
> Intel/Sharp Extended Query Table at 0x0035
>cfi_cmdset_0001: Erase suspend on write enabled
>Flash device: 0x200000 at 0x1c000000
>Creating 5 MTD partitions on "Physically mapped flash":
>0x00000000-0x00040000 : "pmon"
>0x00040000-0x001f0000 : "linux"
>0x000ba890-0x0019f000 : "rootfs"
>mtd: partition "rootfs" doesn't start on an erase block boundary --
>force
>read-only
>0x001f0000-0x00200000 : "nvram"
>0x001a0000-0x001f0000 : "OpenWrt"
>Initializing Cryptographic API
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 512 buckets, 4Kbytes
>TCP: Hash tables configured (established 512 bind 1024)
>Linux IP multicast router 0.06 plus PIM-SM
>ip_conntrack version 2.1 (5953 buckets, 5953 max) - 328 bytes per
>conntrack
>ip_tables: (C) 2000-2002 Netfilter core team
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>NET4: Ethernet Bridge 008 for NET4.0
>802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
>All bugs added by David S. Miller <davem at redhat.com>
>VFS: Mounted root (squashfs filesystem) readonly.
>Mounted devfs on /dev
>Freeing unused kernel memory: 80k freed
>Algorithmics/MIPS FPU Emulator v1.5
>Using /lib/modules/2.4.30/diag.o
>diag boardtype: 00000446
>diag wap54g-v2 detected
>Using /lib/modules/2.4.30/switch-core.o
>Using /lib/modules/2.4.30/switch-robo.o
>Probing device eth0: No Robo switch in managed mode found
>Probing device eth1: No such device
>Probing device eth2: No such device
>Probing device eth3: No such device
>insmod: init_module: switch-robo: No such device
>Using /lib/modules/2.4.30/switch-adm.o
>BFL_ENETADM not set in boardflags. Use force=1 to ignore.
>insmod: init_module: switch-adm: No such device
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>Unlocking mtd4
>init started: BusyBox v1.01 (2006.04.12-12:05+0000) multi-call
>binary
>kernel.panic = 3
>net.ipv4.ip_forward = 1
>net.ipv4.ip_conntrack_max = 16348
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.icmp_ignore_bogus_error_responses = 1
>net.ipv4.tcp_fin_timeout = 30
>net.ipv4.tcp_keepalive_time = 120
>net.ipv4.tcp_timestamps = 0
>net.ipv4.netfilter.ip_conntrack_tcp_timeout_established = 7200
>Using /lib/modules/2.4.30/wl.o
>eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.37.0
>Using /lib/modules/2.4.30/wlcompat.o
>device eth0 entered promiscuous mode
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
># none ignored: can't find/create
>Starting firewall...
>Starting olsrd...
>
> *** olsr.org - 0.4.10 ***
> Build date: Apr 12 2006
> http://www.olsr.org
>
>Parsing file: "/var/etc/olsrd.conf"
>olsr.org - 0.4.10 detaching from the current process...
>Fri Dec 23 12:00:00 UTC 2005
>Starting olsr prio...
>Using /lib/modules/2.4.30/cls_u32.o
>Using /lib/modules/2.4.30/sch_prio.o
>Using /lib/modules/2.4.30/sch_sfq.o
>
>Please press Enter to activate this console.
>
>
>BusyBox v1.01 (2006.04.12-12:05+0000) Built-in shell (ash)
>Enter 'help' for a list of built-in commands.
>
> _______ ________ __
> ( ).-----.-----.-----.) ) ) ).----.) )
> ( - )) _ ) -__) )) ) ) )) _)) _)
> (_______)) __)_____)__)__))________))__) )____)
> )__) F R E I F U N K F I R M W A R E
>
>root at sparklan_testbed:/#
>
More information about the Melbwireless
mailing list