[MLB-WIRELESS] solderless ejtag for WRT54G

[vak]

Why not make a small jig out of a bit of perspex & nylon nuts & bolts ? 
Take all of 2 minutes to whip up.

Dan Flett wrote:

>Hi all,
>
>I'm looking at creating a solder-less ejtag cable for use on the WRT54G.
>This should greatly help people who have truly bricked their routers,
>without having to solder on a header connector to the circuit board.  
>
>I'm thinking that the way to do it would be to get a 12-pin header connector
>and attach it to some sort of small clamp.  You would then simply align the
>header connector against the solder pads on the circuit board and clamp it
>down.  I'm looking for a small clamp that would be suitable - I suppose
>nylon clamp pads on it are a must.  I've looked around in tool shops and
>there isn't much variety in clamp styles - I need something that clamps down
>quite firmly, but doesn't screw the clamp pad itself in circles - it has to
>be a straight down action.
>
>Cheers,
>
>Dan
>
>To unsubscribe: send mail to majordomo at wireless.org.au
>with "unsubscribe melbwireless" in the body of the message
>
>.
>
>  
>

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message