[MLB-WIRELESS] Re: [melbwire-oef] Link tests to gho, waveguide and Conifer

Brenton D ivile01 at yahoo.com.au
Sat Jul 9 23:08:27 EST 2005


I belive the conifer is 24dbi

Also before i put up the new mast i had a 6.5M mast
with a 25dbi hills bolted to the top of it, well
disaster striked, the old pole came down too quick and
the hills smashed into the garage roof head on, the
plastic dipole part was smashed to pieces, the grid
was totally out of shape.

I took some pics.
I had to bash the crap out of it to get it back into
shape. I did find out the it had been modded the marty
bugs way, With the copper pipe and plate.



--- Brenton D <ivile01 at yahoo.com.au> wrote:


---------------------------------
I put up a 10.5M mast with a 25dbi conifer and a
Waveguide that i made.

So i thought i might just do some antenna tests.

both cards are 200mw senao's
with about 10M of lfd4-50 1/2 inch coax each and 9M of
cnt400/rg8 connected to each one respectivly(will cut
them down to about 1M when i am finished)

Here are the stats for them
Link was to gho-south aprrox 7Km from my house.
I also have LOS

As you will see the conifer has about 15db over the
waveguide.

eth1 is the 25dbi conifer (i just pointed it in what i
think is the direction of gho, i could'nt actually see
the hills as it was foggy)

eth 2 is the waveguide 8slot 180 (aprrox 15dbi)
the best signal i have got with the waveguide is -67



eth1      IEEE 802.11b  ESSID:"GHO-South" 
Nickname:"routerd.ivile.net"
          Mode:Managed  Frequency:2.437GHz  Access
Point: 00:02:6F:08:20:59
          Bit Rate:11Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment
thr:off
          Encryption key:off
          Power Management:off
          Link Quality=66/92  Signal level=-54 dBm 
Noise level=-98 dBm
          Rx invalid nwid:0  Rx invalid crypt:22  Rx
invalid frag:0
          Tx excessive retries:56388  Invalid
misc:59988   Missed beacon:0

eth2      IEEE 802.11b  ESSID:"GHO-South" 
Nickname:"routerd.ivile.net"
          Mode:Managed  Frequency:2.437GHz  Access
Point: 00:02:6F:08:20:59
          Bit Rate:11Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment
thr:off
          Encryption key:off
          Power Management:off
          Link Quality=50/92  Signal level=-70 dBm 
Noise level=-100 dBm
          Rx invalid nwid:0  Rx invalid crypt:52984 
Rx invalid frag:2
          Tx excessive retries:1228  Invalid
misc:2274795   Missed beacon:0


Thanks Brenton
Node FUT

Brenton (iViLe)
Access node fut from the web, live stats.
http://211.28.235.187:6111
ivile01 at yahoo.com.au ivile at bur.st
www.ivile.tk
www.waveguides.tk
MW NODE: FUT, FUU


      

      
            
____________________________________________________ 
Do you Yahoo!? 
Try Yahoo! Photomail Beta: Send up to 300 photos in
one email! 
http://au.photomail.mail.yahoo.com
    
    
---------------------------------
  YAHOO! GROUPS LINKS

  
    Visit your group "melbwire-oef" on the web.
   
    To unsubscribe from this group, send an email to:
 melbwire-oef-unsubscribe at yahoogroups.com
   
    Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

  
---------------------------------




Brenton (iViLe)
Access node fut from the web, live stats. http://211.28.235.187:6111
ivile01 at yahoo.com.au ivile at bur.st
www.ivile.tk
www.waveguides.tk
MW NODE: FUT, FUU


		
____________________________________________________ 
Do you Yahoo!? 
Messenger 7.0 beta: Free worldwide PC to PC calls
http://au.beta.messenger.yahoo.com

To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list