[MLB-WIRELESS] replacement for a dlink900+

[Ryan McMullan]

If I recall correctly, you were using power over ethernet?

Have you checked the cable run up to your AP?

Ryan
----- Original Message -----
From: "rick" <mibz at optushome.com.au>
To: "Melb Wireless" <melbwireless at wireless.org.au>
Sent: Wednesday, July 16, 2003 11:54 PM
Subject: [MLB-WIRELESS] replacement for a dlink900+


> i seam to be having alot of problems with my dlink900+ im after something
i
> can have full control thru a web interface like the dlink900+ it doesnt
have
> to be 22mb
>
> there is NOTHING wrong with the wireless side only with the eth side where
> im getting alot of loss
>
> any ideas (see below for pings)
>
> Pinging 10.10.144.130 with 32 bytes of data:
>
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Request timed out.
> Request timed out.
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Request timed out.
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Request timed out.
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
> Reply from 10.10.144.130: bytes=32 time<1ms TTL=127
>
> Ping statistics for 10.10.144.130:
>     Packets: Sent = 14, Received = 10, Lost = 4 (28% loss),
> Approximate round trip times in milli-seconds:
>     Minimum = 0ms, Maximum = 0ms, Average = 0ms
> Control-C
> ^C
> C:\Documents and Settings\rik>
>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message