[MLB-WIRELESS] Routing issue

Matthew Hill mhill at satlink.com.au
Sat Jul 12 17:06:22 EST 2003


MessageGudday

Worked out that on the laptop, i had set the gateway to the ip address of the ap. not the card tha ap is plugged into :d

all working now 

Cheers

Matt
  ----- Original Message ----- 
  From: Nath P 
  To: Matthew Hill ; Melbourne Wireless 
  Sent: Saturday, July 12, 2003 4:10 PM
  Subject: Re: [MLB-WIRELESS] Routing issue


  Maybe you just need to set the Gateway in the AP to 10.10.160.9, wouldnt that make it the default route?

  ----- Original Message ----- 
    From: Matthew Hill 
    To: Tom Sykes ; Melbourne Wireless 
    Sent: Saturday, July 12, 2003 2:25 PM
    Subject: Re: [MLB-WIRELESS] Routing issue


    Tom

    There is notthing in the ap config that i can set a default route or any type of route to.

    is a svec ap bought of the bulk, recently with firmware version 0.0.1.16. and ap util version 0.0.5.2

    Maybe i have to upgrade those settings access routing issues.


    Any ideas anyone ???

    Cheers

    MAtt
    ----- Original Message ----- 
      From: Tom Sykes 
      To: 'Matthew Hill' 
      Sent: Saturday, July 12, 2003 2:16 PM
      Subject: RE: [MLB-WIRELESS] Routing issue


      That will be the issue, as the AP has no route back to your lan. Can you set any other routes - like a normal static route to tell it where your LAN is?

      TS
        -----Original Message-----
        From: Matthew Hill [mailto:mhill at satlink.com.au] 
        Sent: Saturday, 12 July 2003 2:13 PM
        To: Tom Sykes
        Subject: Re: [MLB-WIRELESS] Routing issue


        I cant apear to set a default route of the ap, its a svec ap.

        matt

        ----- Original Message ----- 
          From: Tom Sykes 
          To: 'Matthew Hill' 
          Sent: Friday, July 11, 2003 11:07 PM
          Subject: RE: [MLB-WIRELESS] Routing issue


          What's the default route of the AP at 10.10.160.10?

          It will need to be defaulted to 10.10.160.9


          -----Original Message-----
          From: owner-melbwireless at wireless.org.au
          [mailto:owner-melbwireless at wireless.org.au] On Behalf Of Matthew Hill
          Sent: Friday, 11 July 2003 10:25 PM
          To: Melbourne Wireless
          Subject: [MLB-WIRELESS] Routing issue


          Gudday and Help.

          got a small lan running on 10.10.160.0/29 and on my linuux box i have a
          second eth card 10.10.160.9/29 with my ap 10.10.160.10 plugged straight
          into via xover cable.

          now from any machine i can see 10.10.160.9 but cant see .10 

          l;inux routing is as follows

          Destination     Gateway         Genmask         Flags Metric Ref    Use
          Iface
          acc11-dryb-mel. *               255.255.255.255 UH    0      0        0
          ppp0
          10.10.160.8     *               255.255.255.248 U     0      0        0
          eth1
          10.10.160.0     *               255.255.255.248 U     0      0        0
          eth0
          127.0.0.0       *               255.0.0.0       U     0      0        0
          lo
          default         acc11-dryb-mel. 0.0.0.0         UG    0      0        0
          ppp0


          hope this can be helped

          cheers

          matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030712/36bd3285/attachment.html>


More information about the Melbwireless mailing list