[MLB-WIRELESS] Routing issue

[Matthew Hill]

MessageTom

There is notthing in the ap config that i can set a default route or any type of route to.

is a svec ap bought of the bulk, recently with firmware version 0.0.1.16. and ap util version 0.0.5.2

Maybe i have to upgrade those settings access routing issues.


Any ideas anyone ???

Cheers

MAtt
----- Original Message ----- 
  From: Tom Sykes 
  To: 'Matthew Hill' 
  Sent: Saturday, July 12, 2003 2:16 PM
  Subject: RE: [MLB-WIRELESS] Routing issue


  That will be the issue, as the AP has no route back to your lan. Can you set any other routes - like a normal static route to tell it where your LAN is?

  TS
    -----Original Message-----
    From: Matthew Hill [mailto:mhill at satlink.com.au] 
    Sent: Saturday, 12 July 2003 2:13 PM
    To: Tom Sykes
    Subject: Re: [MLB-WIRELESS] Routing issue


    I cant apear to set a default route of the ap, its a svec ap.

    matt

    ----- Original Message ----- 
      From: Tom Sykes 
      To: 'Matthew Hill' 
      Sent: Friday, July 11, 2003 11:07 PM
      Subject: RE: [MLB-WIRELESS] Routing issue


      What's the default route of the AP at 10.10.160.10?

      It will need to be defaulted to 10.10.160.9


      -----Original Message-----
      From: owner-melbwireless at wireless.org.au
      [mailto:owner-melbwireless at wireless.org.au] On Behalf Of Matthew Hill
      Sent: Friday, 11 July 2003 10:25 PM
      To: Melbourne Wireless
      Subject: [MLB-WIRELESS] Routing issue


      Gudday and Help.

      got a small lan running on 10.10.160.0/29 and on my linuux box i have a
      second eth card 10.10.160.9/29 with my ap 10.10.160.10 plugged straight
      into via xover cable.

      now from any machine i can see 10.10.160.9 but cant see .10 

      l;inux routing is as follows

      Destination     Gateway         Genmask         Flags Metric Ref    Use
      Iface
      acc11-dryb-mel. *               255.255.255.255 UH    0      0        0
      ppp0
      10.10.160.8     *               255.255.255.248 U     0      0        0
      eth1
      10.10.160.0     *               255.255.255.248 U     0      0        0
      eth0
      127.0.0.0       *               255.0.0.0       U     0      0        0
      lo
      default         acc11-dryb-mel. 0.0.0.0         UG    0      0        0
      ppp0


      hope this can be helped

      cheers

      matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20030712/8a5b036a/attachment.html>