[MLB-WIRELESS] OT: URGENT MIRRORING SOFTWARE

[Michael Craig]

Bit Confussed.....Its in a RAID Level 0 I assume.....and you want to replace
the drive without the card knowing? It can't be done......unless ne1 has a
way to change drive serial numbers?

If its RAID 1 or higher....why bother, put the new drive in, start rebuild
and walk away?

And yes Ghost does work with some of the RAID controllers i've seen

Cheers

-----Original Message-----
From: owner-melbwireless at wireless.org.au
[mailto:owner-melbwireless at wireless.org.au]On Behalf Of Matt Pearce
Sent: Thursday, 23 January 2003 3:10 PM
To: melbourne wireless
Subject: [MLB-WIRELESS] OT: URGENT MIRRORING SOFTWARE


Hi All,

Sorry for the OT post but I need to know if anyone has the capabilities to
mirror data that is currently on one of 2 drives in a RAID,  the drive has
been found to be faulty and I am picking up another one soon, to save me
rebuilding the array from the ground up I want to mirror it across.  The
mirroring software needs to be able to mirror anything irrelevant of whats
actually on the HDD.

The faulty HDD doesnt have any problems on the sections I need to mirror so
it should be ok *fingers crossed*.

Thanks for you help and sorry for the OT post.

Matt.


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message