[MLB-WIRELESS] RE: {clan-l} PCB etching

[Dan Rossi]

this is the issue , i have done etching before , (dodgily) , i used stuff
called press n peel from jaycar, print out the design, iron it onto the
copper plate then put it into the solution, but then wait , the bloody holes
, no drill that small for the drill bits which i have. what design is it are
you cloning ?

-----Original Message-----
From: clan-l-admin at clananalogue.org
[mailto:clan-l-admin at clananalogue.org]On Behalf Of Clae
Sent: Wednesday, April 16, 2003 3:08 AM
To: clan-l at clananalogue.org; melbwireless at wireless.org.au
Subject: {clan-l} PCB etching


Hi all,

Is there anyone out there who would be willing to etch a small number
of PCBs (four or five) from existing artwork, for a reasonable fee to
cover time and materials?  The PCBs are small in size as well as
number.

Please reply off list.

Clae

--
Arthur C. Clarke wrote "Any sufficiently advanced technology is
indistinguishable from magic" and for those who don't study science,
the "sufficiently advanced" bar is low enough that scientific
credibility can attach to unscientific belief.
http://www.chipcenter.com/columns/rci/tesla/tesla4.html
_______________________________________________
clan-l mailing list
clan-l at clananalogue.org
http://lists.clananalogue.org/mailman/listinfo/clan-l


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message