[MLB-WIRELESS] Ap's connecting to Aps

[Matthew Hill]

Glenn

so a dlink 900 in ap client is actually emulating a wireless card and
antenna setu ?

his is a 900 in ap mode

Cheers

Matthew
----- Original Message -----
From: <bchild at wireless.org.au>
To: <melbwireless at wireless.org.au>
Sent: Tuesday, April 15, 2003 10:32 AM
Subject: Re: [MLB-WIRELESS] Ap's connecting to Aps


> > My friend has an ap, set up in ap mode, and he has another person
> > conneccted to it, via a wireless card and antenna.
> > I want to know, is there any way i can connect to this ap by using an ap
> > of my own or do i need a wireless card to connect to him.
>
> You can run another AP, just not in AP mode, use ap-client mode, 900 &
> 900+'s do this from what I remember, or the simple method of a card and
> antenna would do the trick as well.
>
> > Ive heard of ap-client, ap and bridging mode, but not sure if any apply.
> Ap-client for ap-ap with a client connect in the middle somewhere on 1
end.
> Bridge mode is only between AP's no client can connect.
>
> Regards Glen
> (Nodes AAC,FTA)
>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message