[MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?

[evilbunny]

Hello Andrew,

Which is what my previous question was, how small is the beam width?

-- 
Best regards,
 evilbunny                            mailto:evilbunny at sydneywireless.com

http://www.SydneyWireless.com - Exercise your communications
freedom to make it do what you never thought possible... 

Wednesday, June 26, 2002, 8:39:39 PM, you wrote:

AD> I'm not 100% on it but as far as I know the higher the gain of an omni the
AD> flatter the signal, like a pancake flat :)

AD> which is good if you are on the same level as the omni.. but if your below
AD> it or above it... etc.. you won't get a signal.... with a lower gain omni
AD> then the signal kinda doesn't go as far... but is more spread out
AD> vertically....

AD> someone feel free to correct me if I have it wrong?

AD> Ferni
AD> ----- Original Message -----
AD> From: "vak" <vak at alphalink.com.au>
AD> To: "melbwireless" <melbwireless at wireless.org.au>
AD> Sent: Wednesday, June 26, 2002 8:33 PM
AD> Subject: Re: [MLB-WIRELESS] $330 Aus 15.4dB Omni. Anyone interested ?


>> Do you mean that the signal density is three dimensionally flat ?
>>
>> Vaskos
>> ---------
>>
>> Drew wrote:
>>
>> > vak wrote:
>> >
>> > >Nup, not flat range at all.
>> > >
>> > 15.4dbi is about as flat as an omni gets.
>> >
>> > D
>> >
>> > To unsubscribe: send mail to majordomo at wireless.org.au
>> > with "unsubscribe melbwireless" in the body of the message
>>
>>
>> To unsubscribe: send mail to majordomo at wireless.org.au
>> with "unsubscribe melbwireless" in the body of the message
>>
>>


AD> To unsubscribe: send mail to majordomo at wireless.org.au
AD> with "unsubscribe melbwireless" in the body of the message


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message