[MLB-WIRELESS] Question about some Wireless cards

Tony Langdon tlangdon at atctraining.com.au
Fri Jun 14 12:02:14 EST 2002


> Question 1:
>     Does the Antenna Gain have to match the Gain of the 
> wireless card or can
> it be higher? (I am thinking that it does NOT have to match 
> the card, but
> just thought i had better check.)

Doesn't work like that.  Card output is not gain, it's power.  The antenna
gain is simply a measure of how much it concentrates the signal in the
desired direction, and is expressed as a ratio of field strength from the
antenna to that which would exist if the signal was radiated equally in all
directions.

---
Outgoing mail has been scanned for Viruses. 
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.370 / Virus Database: 205 - Release Date: 5/06/2002
 

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list