[MLB-WIRELESS] Question re Prisim II cards.

Andrew Dean ferni at shafted.com.au
Fri Jul 5 17:03:39 EST 2002


To bridge a connection i don't think you need to set an IP ?


----- Original Message -----
From: "Tony Smith" <tony at tonsyl.org>
To: "Melb Wireless" <melbwireless at wireless.org.au>
Sent: Friday, July 05, 2002 4:43 PM
Subject: [MLB-WIRELESS] Question re Prisim II cards.


>
> I've had an access point running under Linux for a few weeks now. Using
the
> host-ap drivers and a Dlink DWL-520 card.
>
> I know that it is working perfectly as I'm able to connect to my lan with
my
> laptop and it's PCMCIA wiFi card under both Windows and Linux.
>
> Now I have the first person wanting to set up a node and connect to me and
> I've agreed to sell them a surplus Dlink-520 card and set them up.
>
> I thought that this would be quite simple, get the card working under
linux,
> get the wired ethernet card wroking and then bridge them using the bridge
> utils that come with Redhat 7.3.
>
> In fact it all seemd to go swimmingly, the card drivers (wlan-ng) load
> perfectly and it comes up in "managed" mode etc.
>
> The bridge utils load Ok and I went through the process of creating the
> bridge, adding wlan0 and eth0 to the bridge, zeroing out the IPs on both
and
> then assigning a single IP to the bridge.
>
> No errors reported but once the bridge is up I see activity at the
outgoing
> wired ethernet but canot connect via it. (laptop with wired lan card and
> known good cross-over cable).
>
>
> Help......What am I doing wrong?
>
>
>
> Cheers
>
> Tony Smith
>
> Connected to the internet in Sunny Far North Queensland Australia
> http://www.tonsyl.org
>
>
>
>
>
>
>
>
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message
>
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list