[MLB-WIRELESS] Galaxy Antennas

Simon Hall simonh at auschar.com.au
Thu Jan 10 11:27:57 EST 2002


$11 where I want some please.
Simon

-----Original Message-----
From: Shane Chubb [mailto:s.chubb at tronics.com.au]
Sent: Thursday, January 10, 2002 10:33 AM
To: melbwireless at melbwireless.dyndns.org
Subject: RE: [MLB-WIRELESS] Galaxy Antennas


I would be happy to solder.

I have read of Galaxy units for same unmodified for around $11.

What were you thinking of asking for a modded one? To my understanding
all that is done is the board is cut, the cable is soldered and routed
out the back, then the unit re-sealed.  Is that what you were planning?

Shane

-----Original Message-----
From: Richard Talbot [mailto:richardt at frontline.com.au]
Sent: Wednesday, 9 January 2002 4:28 PM
To: melbwireless at melbwireless.dyndns.org
Subject: [MLB-WIRELESS] Galaxy Antennas


Just wondering what people consider to be the most effective way to
modify
Galaxy Antennas is? I have a number of surplus units here that I might
be
prepared to modify and supply to wireless users. However, I am not quite
sure what the best way of doing it would be. I intend to modify my own
by
soldering a piece of LMR-400 directly to the diplexor. This is probably
not
that good for the average user who doesn't want to solder etc.

The best thing to do would be to install a short cable with an N
connector
on it. Unfortunately LMR-400 connectors are about $30 each, effectively
increasing costs dramatically. One could use some RG-213 and entry level
N
connectors but there ars some losses involved here. What do people
think?



--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
subject of 'unsubscribe melbwireless'  
Archive at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless


--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
subject of 'unsubscribe melbwireless'  
Archive at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
IRC at: au.austnet.org #melb-wireless

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 2744 bytes
Desc: not available
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20020110/3fcff35d/attachment.bin>


More information about the Melbwireless mailing list