[MLB-WIRELESS] Antenna Orientation

Matt Pearce mattpearce at optusnet.com.au
Fri Dec 27 14:33:12 EST 2002


Not sure if the question was properly asked so i'll slightly rephrase it.
If you had an area that was heavily populated by 2.4G wireless networks and
you couldnt get a link running becuase all the channels were used and all
are running with horizontal polarization.  If I decided to put up a PTP link
with someone else in that area say using a couple of 24dbi dishes and both
ends of the link had the dishes mounted vertically.  How would you go in
this instance ??

Hope thats a little clearer.

Matt.

----- Original Message -----
From: "evilbunny" <evilbunny at sydneywireless.com>
To: "Matt Pearce" <mattpearce at optusnet.com.au>
Cc: "melbourne wireless" <melbwireless at wireless.org.au>
Sent: Friday, December 27, 2002 1:38 PM
Subject: Re: [MLB-WIRELESS] Antenna Orientation


> Hello Matt,
>
> MP> Just a quick question about antenna's for those of you in the know.  I
> MP> realise that antenna's normally are polarised horizontaly or
vertically, so
> MP> in saying that if more people with PTP links using directonal
antenna's
> MP> turned them 90degree's would this mean you could effectively run 2
cards on
> MP> the same channel right next to each other but on differently polarized
> MP> antenna's because they would not interfere with each other ??  Would
this
> MP> also work for tipping the antenna onto a 45degree angle ??
>
> Turning the antenna 45 degrees = 3dBm loss, turning 90 degrees = 20dBm
> loss, so you can *IF* you have enough physical separation between them
> on the mast... or 2 directionals looking the other way etc etc etc,
> physical separation is the key though...
>
> --
> Best regards,
>  evilbunny                            mailto:evilbunny at sydneywireless.com
>
> The best kind of cat toy has a person on one end.
>
> http://www.cacert.org - Free Security Certificates
> http://www.nodedb.com - Think globally, network locally
> http://www.sydneywireless.com - Telecommunications Freedom
>


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message



More information about the Melbwireless mailing list