[MLB-WIRELESS] [WTG][hardware] looking for an AUI to rj45 transciever

[vak]

Most old el cheapo hubs had AUI & BNC(10 base5) on them.

In fact, i think I have an AUI - BNC repeater lying around... but not to 10
base T which is what you want.

Cheers,

Vaskos
-------

Paul van den Bergen wrote:

> Hi all,
> the saga so far.
> I recently got a sun sparc 2 - for free (yah)
> which I did not have root password for nor NVRAM password for. (boo)
> and then I dropped the harddisk (boohoohoo)
> and got a bigger harddisk for $30 off ebay (yah)
> but still couldn't get into because I didn't have an equivalent machine
> to install the OS on (and surprisingly the unix kernal for a sparc 2 and
> a sparc 10 are not compatable... although it did boot somewhat.  just
> not enough.
> several attempts to break into the NVRAM not withstanding I recently got
> into it. (yah) because the NVRAM chip is dying. (boo hoo) I have a chip
> mod to put a new battery on it, or I can spend $65 and get a new one
> from sunrk in sydney.(fun, if not total yah)
>
> but now I realise that I don't have (or have lost... yes, I think that
> is actually the case...) the AUI to RJ45 connector.  so unless I want to
> run IP over serial, I would really like to get one...
>
> does any one have one of these that they don't need or would be willing
> to sell me for a small fee (I can get new ones for ~$45)
>
> --
> Dr Paul van den Bergen
> SERC, RMIT University
> paul at serc.rmit.edu.au
> +613 9925 1624 phone
> +613 9925 5699 fax
> goofey: bulwynkl
>
> To unsubscribe: send mail to majordomo at wireless.org.au
> with "unsubscribe melbwireless" in the body of the message


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message