[MLB-WIRELESS] Prism2 Host AP Linux Driver Updated

[ABBENHUYS, Ryan]

For those who use this driver.  It was updated last night.
http://people.ssh.com/jkm/Prism2/

ChangeLog for Host AP driver for Intersil Prism2

2002-04-21
	* added support for Prism2.5-based native PCI cards and PC Cards
	  in PLX9052-base PCI adapters
	  - new module names (to avoid duplicates with linux-wlan-ng):
	    PC Card version: hostap_cs.o
	    PCI version for Prism2.5: hostap_pci.o
	    PLX version: hostap_plx.o
	  - please note, that /etc/pcmcia/prism2.conf is renamed to
	    hostap_cs.conf and you may need to manually remove old
prism2.conf
	    from /etc/pcmcia
	* fixed BAP setup problems (BAP0 and BAP1 cannot apparently be setup
	  correctly, even though they can be used concurrently for
 	  reading/writing)
	  - this removes at least some corruption problems (e.g., "no SNAP?"
	    messages)
	  - this fixes some card hangs (which would usually cause
 	    "hfa384x_setup_bap - timeout3" messages)
	* re-organized driver source code (see driver_source.txt for
details)
	* do not allow "Any" (i.e., zero-len) SSID to be set when in Host AP
	  mode (this seems to kill the card)
	* fixed byte order bugs in SIOCSIWMODE, SIOCSIWFREQ, and SIOCSIWRATE
 	  handlers (affecting big endian platforms)
	* fixed WEP configuration to return valid configuration after card
	  reset


___________________________

WARNING
This email and any attachment may contain confidential information.  If you are not the intended recipient you are not authorised to copy or disclose all or any part of it without the prior written consent of the Metropolitan Fire and Emergency Services Board.
___________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wireless.org.au/pipermail/melbwireless/attachments/20020422/d97b0185/attachment.html>