[MLB-WIRELESS] pci v2.2 required?

[Matthew Chipman]

It is marked as a Maxtron but it seems to be a Surecom device it also has a
plx 9052 chipset on the card so it may be a dud :(

http://www.surecom.com.tw/pd9427_9320.htm

-Matt


----- Original Message -----
From: "Roger Venning" <r.venning at telstra.com>
To: "Matthew Chipman" <mkchipman at optushome.com.au>
Sent: Saturday, April 06, 2002 11:46 AM
Subject: Re: [MLB-WIRELESS] pci v2.2 required?


>
> Matthew,
>
> where exactly did you purchase this carrier from?
>
> Roger.
>
> ----- Original Message -----
> From: "Matthew Chipman" <mkchipman at optushome.com.au>
> Date: Saturday, April 6, 2002 11:00 pm
> Subject: Re: [MLB-WIRELESS] pci v2.2 required?
>
> > I am currently testing an adapter from Maxtron that will cost
> > about $75.00
> > inc.  First impressions are good. Testing with the $50.00 cards
> > shows the
> > following.
> >
> > They fit in the socket
> > The card leds light up and flash
> > I get a 1 second conectivity then nothing.
> > Windows device manager reports a prisim2 network adapter.
> >
> > I believe it to be a driver issue which i hope to work out shortly.
> >
> > I will test it on Linux as well
> >
> > -Matt
> >
> >
> > ----- Original Message -----
> > From: <simmans at datafast.net.au>
> > To: <mibz at optushome.com.au>
> > Cc: <melbwireless at www.wireless.org.au>; <joris at linux.be>
> > Sent: Friday, April 05, 2002 2:54 PM
> > Subject: Re: [MLB-WIRELESS] pci v2.2 required?
> >
> >
> > > Has anyone managed to find a good source of these adapters?
> > >
> > > > pent 2 systems have pci v2.2
> > > >
> > > > and the actual adapter requiers 5v's it doesnt matter if the
> > pcmcia> > card used 5v or 3.3v
> > > >
> > > >
> > > > the card sucks 5v and then sorts its self out
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Joris" <joris at linux.be>
> > > > To: <melbwireless at wireless.org.au>
> > > > Sent: Friday, April 05, 2002 6:39 AM
> > > > Subject: [MLB-WIRELESS] pci v2.2 required?
> > > >
> > > >
> > > >> Hia,
> > > >>
> > > >> most pci convertors require pci v2.2
> > > >> I don't recall when precicely they introduced pci v2.2
> > mainstream, but
> > > >> I don't think I have it in my routing-machine.
> > > >>
> > > >> Is this v2.2 requirement just for the 5v voltage? and if I
> > only use
> > > >> 3.3v pcmcia cards in the system?
> > > >>
> > > >> Or are there other ways to get it to work?
> > > >>
> > > >>
> > > >> *stumbling in the dark*
> > > >>
> > > >> --
> > > >>   Greetings
> > > >>   Joris
> > > >>   joris at linux.be  UIN: 25569167
> > > >>   PGP is currently out-of-use
> > > >>
> > > >> To unsubscribe: send mail to majordomo at wireless.org.au
> > > >> with "unsubscribe melbwireless" in the body of the message
> > > >>
> > > >
> > > >
> > > > To unsubscribe: send mail to majordomo at wireless.org.au
> > > > with "unsubscribe melbwireless" in the body of the message
> > >
> > >
> > >
> > >
> > > To unsubscribe: send mail to majordomo at wireless.org.au
> > > with "unsubscribe melbwireless" in the body of the message
> > >
> > >
> >
> >
> >
> > To unsubscribe: send mail to majordomo at wireless.org.au
> > with "unsubscribe melbwireless" in the body of the message
> >
> >
>
>



To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message