[MLB-WIRELESS] Cant connect ad-hoc??? (%50 card)

[Roger Venning]

Hi,

if people who have the $50 Enterasys cards operational could reply to 
me with the following, I will collate & place on the Wiki. This might 
help those who don't yet have something working... (please don't reply 
to the list):

Host O/S:
Host O/S driver & version:
Card firmware version(s):
PCI carrier? model:
Brief description of what has been tested:


Thanks,
   Roger.

----- Original Message -----
From: "Brendan Hiley" <Pro at ProFX.net>
Date: Friday, April 5, 2002 1:46 pm
Subject: Re: [MLB-WIRELESS] Cant connect ad-hoc??? (%50 card)

> From what I've gathered, the 6.04 firmware that comes on those 
> cards is only capable of ad-hoc demo mode.
> This is apparently fixed in 6.06 which is available on the website.
> 
> Or.. If you're running WindowsXP, drop by the windowsupdate site.
> 
> It just updated my driver to the agere system 7.42 (enterasys only 
> support up to 6.25) and firmware to 8.10 (enterasys's latest is 6.06).
> 
> Hope that helps.
> 
> -ProFX
>  ----- Original Message ----- 
>  From: Luke 
>  To: melbwireless at www.wireless.org.au 
>  Sent: Friday, April 05, 2002 12:17 PM
>  Subject: [MLB-WIRELESS] Cant connect ad-hoc??? (%50 card)
> 
> 
>  These things go good talkint to each other but I cant get my 
> cisco gear to talk to them ad-hoc.  Same channel, same ssid, same 
> network name, same room.  Any ideas??  Cheers/
> 
 


To unsubscribe: send mail to majordomo at wireless.org.au
with "unsubscribe melbwireless" in the body of the message