[MLB-WIRELESS] Ready to connect in Croydon?

Luke lrich at ruralnet.net.au
Thu Nov 8 20:33:11 EST 2001


Id like to have a card with 4 W output, let alone 200 mW.  I know its EIRP
but as far as I know theres no restriction from the card, only reglatory
(ACA).
----- Original Message -----
From: Drew <drew at no6.com>
To: <melbwireless at melbwireless.dyndns.org>
Sent: Thursday, November 08, 2001 7:45 PM
Subject: Re: [MLB-WIRELESS] Ready to connect in Croydon?


> IIRC, sticking from channel 1-11 will keep you in the 4W range, anything
> higher is restricted to the 200mW limit.
>
> -D
>
> Luke wrote:
>
> >Tony
> >
> >Is there something you know that we dont?  What is the difference exactly
> >between them and us?  Ive got a list from Cisco what frequencies belong
to
> >who, but it doesnt show Australia.  Most gear could just be flashed or
have
> >an option under setup for zoning surely.
> >----- Original Message -----
> >From: Tony Langdon <tlangdon at atctraining.com.au>
> >To: <melbwireless at melbwireless.dyndns.org>
> >Sent: Thursday, November 08, 2001 1:00 PM
> >Subject: RE: [MLB-WIRELESS] Ready to connect in Croydon?
> >
> >
> >>A word of warning for those importing stuff from the USA.
> >>
> >>Check the specs carefully - The US ISM band is slightly different to the
> >>Australian one.  This has two implications.  Firstly, some US spec gear
> >>
> >may
> >
> >>not interoperate with locally sourced stuff, due to different band
limits.
> >>
> >>Secondly, equipment using the full US band (i.e. the bit above 2463 MHz)
> >>
> >is
> >
> >>still legal, but limited to 200mW EIRP, not the 4W that Australian spec
> >>
> >gear
> >
> >>is allowed to do.
> >>
> >>Tony Langdon
> >>Systems Development and Support
> >>ATC Training Australasia.  Level 1 310 King St Melbourne 3000.
> >>Phone:  1300 13 1983   WWW:  http://www.atctraining.com.au
> >>
> >>
> >>>-----Original Message-----
> >>>From: Jonathan Oxer [mailto:jon at ivt.com.au]
> >>>Sent: Thursday, 8 November 2001 11:58
> >>>To: melbwireless at melbwireless.dyndns.org
> >>>Subject: [MLB-WIRELESS] Ready to connect in Croydon?
> >>>
> >>>
> >>>Well, I've just returned from Los Angeles with a Linksys WAP11 in my
> >>>suitcase, and I've got it running now in Croydon (Clare St, which is
> >>>right near the intersection of Bayswater Road and Eastfield Road -
> >>>node BJD on the node map).
> >>>
> >>>Anyone close that wants to try a link up?
> >>>
> >>>Jonathan Oxer
> >>>Director
> >>>Internet Vision Technologies
> >>>www.ivt.com.au
> >>>
> >>>
> >>>
> >>>--
> >>>To unsubscribe, send mail to
> >>>minordomo at melbwireless.dyndns.org with a subject of
> >>>'unsubscribe melbwireless'
> >>>Archive of the Entire mailing list at:
> >>>http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=me
> >>>
> >>lbwireless
> >>
> >>--
> >>To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
> >>
> >subject of 'unsubscribe melbwireless'
> >
> >>Archive of the Entire mailing list at:
> >>http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
> >>
> >
> >
> >--
> >To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
subject of 'unsubscribe melbwireless'
> >Archive of the Entire mailing list at:
> >http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless
> >
> >
>
>
>
> --
> To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a
subject of 'unsubscribe melbwireless'
> Archive of the Entire mailing list at:
> http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless


--
To unsubscribe, send mail to minordomo at melbwireless.dyndns.org with a subject of 'unsubscribe melbwireless'  
Archive of the Entire mailing list at:
http://melbwireless.dyndns.org/cgi-bin/minorweb.pl?A=LIST&L=melbwireless



More information about the Melbwireless mailing list